W800RF signal garbage.

Message
Author
Humanzee
Posts: 83
Joined: Mon Jun 14, 2010 1:09 pm

Re: W800RF signal garbage.

#21 Post by Humanzee » Fri Oct 14, 2011 4:57 pm

HR12a is a palm pad (as far as I know), The other device I was testing with primarily is a ms14a (Eagle Eye) motion sensor
I found a KR22A Keychain remote pad and sent A1 ON, A2 ON, A3 ON, A4 ON in sequence which produced the below.

Code: Select all

10/14/2011 05:51:23.354 PM - Found my Object Name: W800RF-Pleepleus
10/14/2011 05:51:23.370 PM - W800RF Plugin Version: 0.3.1
10/14/2011 05:51:23.374 PM - Port is set to: 2
10/14/2011 05:51:23.378 PM - Debounce is set to: 120
10/14/2011 05:51:23.391 PM - W800RF found on COM2
10/14/2011 05:51:23.395 PM - Finished Loading: W800RF-Pleepleus
10/14/2011 05:51:26.623 PM - Swapped HEX:  0 0 60 0
10/14/2011 05:51:26.760 PM - Swapped HEX:  0 0 9F 0
10/14/2011 05:51:26.884 PM - Swapped HEX:  0 0 0 FF
10/14/2011 05:51:26.893 PM - HouseCode=M UnitCode=1 FunctionCode=ON
10/14/2011 05:51:26.897 PM - GetObjectByAddress: M1
10/14/2011 05:51:27.064 PM - ---------------------------------------------------------------------
10/14/2011 05:51:27.080 PM - Set: X10-M1 to ON
10/14/2011 05:51:27.205 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:27.210 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:27.214 PM - GetObjectByAddress: A1
10/14/2011 05:51:27.286 PM - ---------------------------------------------------------------------
10/14/2011 05:51:27.291 PM - Set: X10-A1 to ON
10/14/2011 05:51:27.415 PM - Swapped HEX:  0 0 0 FF
10/14/2011 05:51:27.419 PM - HouseCode=M UnitCode=1 FunctionCode=ON
10/14/2011 05:51:27.423 PM - GetObjectByAddress: M1
10/14/2011 05:51:27.481 PM - ---------------------------------------------------------------------
10/14/2011 05:51:27.486 PM - Set: X10-M1 to ON
10/14/2011 05:51:27.610 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:27.615 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:27.619 PM - GetObjectByAddress: A1
10/14/2011 05:51:27.683 PM - ---------------------------------------------------------------------
10/14/2011 05:51:27.687 PM - Set: X10-A1 to ON
10/14/2011 05:51:27.823 PM - Swapped HEX:  0 0 0 FF
10/14/2011 05:51:27.828 PM - HouseCode=M UnitCode=1 FunctionCode=ON
10/14/2011 05:51:27.833 PM - GetObjectByAddress: M1
10/14/2011 05:51:27.890 PM - ---------------------------------------------------------------------
10/14/2011 05:51:27.895 PM - Set: X10-M1 to ON
10/14/2011 05:51:28.020 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:28.025 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:28.029 PM - GetObjectByAddress: A1
10/14/2011 05:51:28.164 PM - ---------------------------------------------------------------------
10/14/2011 05:51:28.170 PM - Set: X10-A1 to ON
10/14/2011 05:51:28.306 PM - Swapped HEX:  0 0 0 FF
10/14/2011 05:51:28.311 PM - HouseCode=M UnitCode=1 FunctionCode=ON
10/14/2011 05:51:28.315 PM - GetObjectByAddress: M1
10/14/2011 05:51:28.390 PM - ---------------------------------------------------------------------
10/14/2011 05:51:28.395 PM - Set: X10-M1 to ON
10/14/2011 05:51:28.520 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:28.524 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:28.528 PM - GetObjectByAddress: A1
10/14/2011 05:51:28.579 PM - ---------------------------------------------------------------------
10/14/2011 05:51:28.583 PM - Set: X10-A1 to ON
10/14/2011 05:51:28.706 PM - Swapped HEX:  0 0 10 EF
10/14/2011 05:51:28.710 PM - HouseCode=N UnitCode=1 FunctionCode=ON
10/14/2011 05:51:28.714 PM - GetObjectByAddress: N1
10/14/2011 05:51:28.785 PM - ---------------------------------------------------------------------
10/14/2011 05:51:28.790 PM - Set: X10-N1 to ON
10/14/2011 05:51:28.914 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:28.918 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:28.921 PM - GetObjectByAddress: A1
10/14/2011 05:51:28.969 PM - ---------------------------------------------------------------------
10/14/2011 05:51:28.973 PM - Set: X10-A1 to ON
10/14/2011 05:51:29.097 PM - Swapped HEX:  0 0 10 EF
10/14/2011 05:51:29.102 PM - HouseCode=N UnitCode=1 FunctionCode=ON
10/14/2011 05:51:29.105 PM - GetObjectByAddress: N1
10/14/2011 05:51:29.152 PM - ---------------------------------------------------------------------
10/14/2011 05:51:29.155 PM - Set: X10-N1 to ON
10/14/2011 05:51:29.290 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:29.308 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:29.311 PM - GetObjectByAddress: A1
10/14/2011 05:51:29.365 PM - ---------------------------------------------------------------------
10/14/2011 05:51:29.369 PM - Set: X10-A1 to ON
10/14/2011 05:51:29.492 PM - Swapped HEX:  0 0 10 EF
10/14/2011 05:51:29.496 PM - HouseCode=N UnitCode=1 FunctionCode=ON
10/14/2011 05:51:29.500 PM - GetObjectByAddress: N1
10/14/2011 05:51:29.548 PM - ---------------------------------------------------------------------
10/14/2011 05:51:29.552 PM - Set: X10-N1 to ON
10/14/2011 05:51:29.675 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:29.680 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:29.683 PM - GetObjectByAddress: A1
10/14/2011 05:51:29.731 PM - ---------------------------------------------------------------------
10/14/2011 05:51:29.735 PM - Set: X10-A1 to ON
10/14/2011 05:51:29.870 PM - Swapped HEX:  0 0 10 EF
10/14/2011 05:51:29.875 PM - HouseCode=N UnitCode=1 FunctionCode=ON
10/14/2011 05:51:29.879 PM - GetObjectByAddress: N1
10/14/2011 05:51:29.941 PM - ---------------------------------------------------------------------
10/14/2011 05:51:29.945 PM - Set: X10-N1 to ON
10/14/2011 05:51:30.068 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:30.072 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:30.076 PM - GetObjectByAddress: A1
10/14/2011 05:51:30.167 PM - ---------------------------------------------------------------------
10/14/2011 05:51:30.171 PM - Set: X10-A1 to ON
10/14/2011 05:51:30.306 PM - Swapped HEX:  0 0 10 EF
10/14/2011 05:51:30.310 PM - HouseCode=N UnitCode=1 FunctionCode=ON
10/14/2011 05:51:30.314 PM - GetObjectByAddress: N1
10/14/2011 05:51:30.363 PM - ---------------------------------------------------------------------
10/14/2011 05:51:30.367 PM - Set: X10-N1 to ON
10/14/2011 05:51:30.490 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:30.494 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:30.498 PM - GetObjectByAddress: A1
10/14/2011 05:51:30.547 PM - ---------------------------------------------------------------------
10/14/2011 05:51:30.551 PM - Set: X10-A1 to ON
10/14/2011 05:51:30.676 PM - Swapped HEX:  0 0 8 F7
10/14/2011 05:51:30.680 PM - HouseCode=M UnitCode=1 FunctionCode=ON
10/14/2011 05:51:30.683 PM - GetObjectByAddress: M1
10/14/2011 05:51:30.733 PM - ---------------------------------------------------------------------
10/14/2011 05:51:30.737 PM - Set: X10-M1 to ON
10/14/2011 05:51:30.861 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:30.865 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:30.869 PM - GetObjectByAddress: A1
10/14/2011 05:51:30.915 PM - ---------------------------------------------------------------------
10/14/2011 05:51:30.919 PM - Set: X10-A1 to ON
10/14/2011 05:51:31.054 PM - Swapped HEX:  0 0 8 F7
10/14/2011 05:51:31.059 PM - HouseCode=M UnitCode=1 FunctionCode=ON
10/14/2011 05:51:31.062 PM - GetObjectByAddress: M1
10/14/2011 05:51:31.117 PM - ---------------------------------------------------------------------
10/14/2011 05:51:31.121 PM - Set: X10-M1 to ON
10/14/2011 05:51:31.244 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:31.249 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:31.253 PM - GetObjectByAddress: A1
10/14/2011 05:51:31.304 PM - ---------------------------------------------------------------------
10/14/2011 05:51:31.307 PM - Set: X10-A1 to ON
10/14/2011 05:51:31.431 PM - Swapped HEX:  0 0 8 F7
10/14/2011 05:51:31.436 PM - HouseCode=M UnitCode=1 FunctionCode=ON
10/14/2011 05:51:31.439 PM - GetObjectByAddress: M1
10/14/2011 05:51:31.485 PM - ---------------------------------------------------------------------
10/14/2011 05:51:31.489 PM - Set: X10-M1 to ON
10/14/2011 05:51:31.613 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:31.617 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:31.621 PM - GetObjectByAddress: A1
10/14/2011 05:51:31.669 PM - ---------------------------------------------------------------------
10/14/2011 05:51:31.673 PM - Set: X10-A1 to ON
10/14/2011 05:51:31.797 PM - Swapped HEX:  0 0 8 F7
10/14/2011 05:51:31.802 PM - HouseCode=M UnitCode=1 FunctionCode=ON
10/14/2011 05:51:31.806 PM - GetObjectByAddress: M1
10/14/2011 05:51:31.855 PM - ---------------------------------------------------------------------
10/14/2011 05:51:31.859 PM - Set: X10-M1 to ON
10/14/2011 05:51:31.994 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:31.998 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:32.003 PM - GetObjectByAddress: A1
10/14/2011 05:51:32.054 PM - ---------------------------------------------------------------------
10/14/2011 05:51:32.058 PM - Set: X10-A1 to ON
10/14/2011 05:51:32.182 PM - Swapped HEX:  0 0 8 F7
10/14/2011 05:51:32.186 PM - HouseCode=M UnitCode=1 FunctionCode=ON
10/14/2011 05:51:32.189 PM - GetObjectByAddress: M1
10/14/2011 05:51:32.239 PM - ---------------------------------------------------------------------
10/14/2011 05:51:32.243 PM - Set: X10-M1 to ON
10/14/2011 05:51:32.367 PM - Swapped HEX:  0 0 60 9F
10/14/2011 05:51:32.371 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/14/2011 05:51:32.375 PM - GetObjectByAddress: A1
10/14/2011 05:51:32.422 PM - ---------------------------------------------------------------------
10/14/2011 05:51:32.427 PM - Set: X10-A1 to ON
10/14/2011 05:51:32.550 PM - Swapped HEX:  0 0 18 E7
10/14/2011 05:51:32.554 PM - HouseCode=N UnitCode=1 FunctionCode=ON
10/14/2011 05:51:32.558 PM - GetObjectByAddress: N1
10/14/2011 05:51:32.662 PM - ---------------------------------------------------------------------
10/14/2011 05:51:32.666 PM - Set: X10-N1 to ON
10/14/2011 05:51:32.716 PM - *** Received Shut-Down.  ComPort Timer Stopped
looked fine in wgl demo with the KR22A.

Vaughn
Site Admin
Posts: 1432
Joined: Thu May 13, 2010 2:17 pm

Re: W800RF signal garbage.

#22 Post by Vaughn » Sun Oct 16, 2011 11:54 am

You are still getting all 0 for the first two hex addresses... So there is definitly a problem...


Vaughn

Vaughn
Site Admin
Posts: 1432
Joined: Thu May 13, 2010 2:17 pm

Re: W800RF signal garbage.

#23 Post by Vaughn » Tue Oct 18, 2011 11:36 pm

Is anyone else using a W800RF and can say positive or negative on how it is working for them?

I don't have a spare one, or I would try it on some of my other machines.

I guess I will have to order another one for the developemtn box. Until then not sure what else I can do. Maybe enhance the logs a little bit and show the binary values so we can compare better to the demo app.

Vaughn

Humanzee
Posts: 83
Joined: Mon Jun 14, 2010 1:09 pm

Re: W800RF signal garbage.

#24 Post by Humanzee » Fri Oct 21, 2011 11:20 am

Ill try temporarily moving my W800 to a different computer to see if there is something unique about my server that is causing this.

Post Reply