W800RF signal garbage.

Message
Author
Humanzee
Posts: 83
Joined: Mon Jun 14, 2010 1:09 pm

Re: W800RF signal garbage.

#11 Post by Humanzee » Wed Oct 12, 2011 7:19 pm

Here is the log with debug set to true, when sending K7 ON

Code: Select all

10/12/2011 08:17:32.294 PM - Found my Object Name: W800RF-Pleepleus
10/12/2011 08:17:32.312 PM - Port is set to: 2
10/12/2011 08:17:32.317 PM - Debounce is set to: 120
10/12/2011 08:17:32.366 PM - W800RF found on COM2
10/12/2011 08:17:32.371 PM - Finished Loading: W800RF-Pleepleus
10/12/2011 08:17:56.611 PM - Swapped HEX:  0 0 C0 0
10/12/2011 08:17:56.747 PM - Swapped HEX:  0 0 3F 0
10/12/2011 08:17:56.871 PM - Swapped HEX:  0 0 48 B7
10/12/2011 08:17:56.880 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/12/2011 08:17:56.885 PM - GetObjectByAddress: C1
10/12/2011 08:17:57.123 PM - ---------------------------------------------------------------------
10/12/2011 08:17:57.128 PM - Set: X10-C1 to ON
10/12/2011 08:17:57.265 PM - Swapped HEX:  0 0 C0 3F
10/12/2011 08:17:57.271 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/12/2011 08:17:57.275 PM - GetObjectByAddress: K1
10/12/2011 08:17:57.346 PM - ---------------------------------------------------------------------
10/12/2011 08:17:57.350 PM - Set: X10-K1 to ON
10/12/2011 08:17:57.485 PM - Swapped HEX:  0 0 48 B7
10/12/2011 08:17:57.491 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/12/2011 08:17:57.496 PM - GetObjectByAddress: C1
10/12/2011 08:17:57.556 PM - ---------------------------------------------------------------------
10/12/2011 08:17:57.562 PM - Set: X10-C1 to ON
10/12/2011 08:17:57.685 PM - Swapped HEX:  0 0 C0 3F
10/12/2011 08:17:57.689 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/12/2011 08:17:57.692 PM - GetObjectByAddress: K1
10/12/2011 08:17:57.748 PM - ---------------------------------------------------------------------
10/12/2011 08:17:57.752 PM - Set: X10-K1 to ON
10/12/2011 08:17:57.876 PM - Swapped HEX:  0 0 48 B7
10/12/2011 08:17:57.882 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/12/2011 08:17:57.886 PM - GetObjectByAddress: C1
10/12/2011 08:17:57.941 PM - ---------------------------------------------------------------------
10/12/2011 08:17:57.947 PM - Set: X10-C1 to ON
10/12/2011 08:17:58.072 PM - Swapped HEX:  0 0 C0 3F
10/12/2011 08:17:58.079 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/12/2011 08:17:58.085 PM - GetObjectByAddress: K1
10/12/2011 08:17:58.139 PM - ---------------------------------------------------------------------
10/12/2011 08:17:58.145 PM - Set: X10-K1 to ON
10/12/2011 08:17:58.282 PM - Swapped HEX:  0 0 48 B7
10/12/2011 08:17:58.289 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/12/2011 08:17:58.295 PM - GetObjectByAddress: C1
10/12/2011 08:17:58.354 PM - ---------------------------------------------------------------------
10/12/2011 08:17:58.359 PM - Set: X10-C1 to ON
10/12/2011 08:17:58.484 PM - Swapped HEX:  0 0 C0 3F
10/12/2011 08:17:58.490 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/12/2011 08:17:58.495 PM - GetObjectByAddress: K1
10/12/2011 08:17:58.558 PM - ---------------------------------------------------------------------
10/12/2011 08:17:58.564 PM - Set: X10-K1 to ON
10/12/2011 08:17:58.689 PM - Swapped HEX:  0 0 48 B7
10/12/2011 08:17:58.692 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/12/2011 08:17:58.697 PM - GetObjectByAddress: C1
10/12/2011 08:17:58.743 PM - ---------------------------------------------------------------------
10/12/2011 08:17:58.748 PM - Set: X10-C1 to ON

Vaughn
Site Admin
Posts: 1432
Joined: Thu May 13, 2010 2:17 pm

Re: W800RF signal garbage.

#12 Post by Vaughn » Thu Oct 13, 2011 12:02 pm

Here is my log with Debug=true, it looks a little different then yours, so I will put a version number in the log and rerelease to be sure.


10/13/2011 02:57:52.585 PM - Found my Object Name: W800RF-ADMIN
10/13/2011 02:57:52.600 PM - Port is set to: 5
10/13/2011 02:57:52.600 PM - Debounce is set to: 120
10/13/2011 02:57:52.631 PM - W800RF found on COM5
10/13/2011 02:57:52.631 PM - Finished Loading: W800RF-ADMIN
10/13/2011 02:57:56.609 PM - Swapped HEX: 20 DF 4 FB
10/13/2011 02:57:56.609 PM - HouseCode=M UnitCode=9 FunctionCode=OFF
10/13/2011 02:57:56.609 PM - GetObjectByAddress: M9
10/13/2011 02:57:56.734 PM - ---------------------------------------------------------------------
10/13/2011 02:57:56.734 PM - Set: X10-M9 to OFF
10/13/2011 02:57:56.937 PM - Swapped HEX: 20 DF 4 FB
10/13/2011 02:57:56.937 PM - HouseCode=M UnitCode=9 FunctionCode=OFF
10/13/2011 02:57:56.937 PM - ReadCommPort SPAM (Exiting Sub, this is normal)
10/13/2011 02:57:58.981 PM - Swapped HEX: 48 B7 C0 3F
10/13/2011 02:57:58.981 PM - HouseCode=K UnitCode=7 FunctionCode=ON
10/13/2011 02:57:58.981 PM - GetObjectByAddress: K7
10/13/2011 02:57:59.308 PM - ---------------------------------------------------------------------
10/13/2011 02:57:59.308 PM - Set: X10-K7 to ON
10/13/2011 02:57:59.511 PM - Swapped HEX: 48 B7 C0 3F
10/13/2011 02:57:59.511 PM - HouseCode=K UnitCode=7 FunctionCode=ON
10/13/2011 02:57:59.511 PM - ReadCommPort SPAM (Exiting Sub, this is normal)
10/13/2011 02:58:00.525 PM - Swapped HEX: 68 97 C0 3F
10/13/2011 02:58:00.525 PM - HouseCode=K UnitCode=7 FunctionCode=OFF
10/13/2011 02:58:00.525 PM - GetObjectByAddress: K7
10/13/2011 02:58:00.619 PM - ---------------------------------------------------------------------
10/13/2011 02:58:00.619 PM - Set: X10-K7 to OFF
10/13/2011 02:58:00.868 PM - Swapped HEX: 68 97 C0 3F
10/13/2011 02:58:00.868 PM - HouseCode=K UnitCode=7 FunctionCode=OFF
10/13/2011 02:58:00.868 PM - ReadCommPort SPAM (Exiting Sub, this is normal)
10/13/2011 02:58:01.071 PM - Swapped HEX: 68 97 C0 3F
10/13/2011 02:58:01.071 PM - HouseCode=K UnitCode=7 FunctionCode=OFF
10/13/2011 02:58:01.071 PM - ReadCommPort SPAM (Exiting Sub, this is normal)
10/13/2011 02:58:02.085 PM - Swapped HEX: 48 B7 C0 3F
10/13/2011 02:58:02.085 PM - HouseCode=K UnitCode=7 FunctionCode=ON
10/13/2011 02:58:02.085 PM - GetObjectByAddress: K7
10/13/2011 02:58:02.241 PM - ---------------------------------------------------------------------
10/13/2011 02:58:02.241 PM - Set: X10-K7 to ON
10/13/2011 02:58:02.444 PM - Swapped HEX: 48 B7 C0 3F
10/13/2011 02:58:02.444 PM - HouseCode=K UnitCode=7 FunctionCode=ON
10/13/2011 02:58:02.444 PM - ReadCommPort SPAM (Exiting Sub, this is normal)
10/13/2011 02:58:02.662 PM - Swapped HEX: 48 B7 C0 3F
10/13/2011 02:58:02.662 PM - HouseCode=K UnitCode=7 FunctionCode=ON
10/13/2011 02:58:02.662 PM - ReadCommPort SPAM (Exiting Sub, this is normal)
10/13/2011 02:58:03.271 PM - Swapped HEX: 68 97 C0 3F
10/13/2011 02:58:03.271 PM - HouseCode=K UnitCode=7 FunctionCode=OFF
10/13/2011 02:58:03.271 PM - GetObjectByAddress: K7

Vaughn
Site Admin
Posts: 1432
Joined: Thu May 13, 2010 2:17 pm

Re: W800RF signal garbage.

#13 Post by Vaughn » Thu Oct 13, 2011 12:29 pm

Humanzee, please while testing your W800RF issues in OSA, please disable the Insteon and any X10 plugins you have.

I had spam, and it stopped when I unhooked my CM15A plugin which was trying to repeat the signals with it's little antenna. I don't think you have one, but insteon repeats too.


Just another difference between when you have OSA running verses the W800RF demo app...


I am publishing a new plugin for you now.


BTW What is K7? I did my tests with the PalmPad, but different X10 devices transmit differently, and maybe that is why my logs are showing Com Port Spam (which is ok)

Vaughn
Site Admin
Posts: 1432
Joined: Thu May 13, 2010 2:17 pm

Re: W800RF signal garbage.

#14 Post by Vaughn » Thu Oct 13, 2011 12:39 pm

OK, I poseted version 0.3.1 of the W800RF plugin on the site. This version puts its version number in the log, just to be sure we both got updated, etc.

Here is my new log, again, testing with a Palmpad for K7, but you will see a motion detector that went off in there too....

10/13/2011 03:36:48.846 PM - Found my Object Name: W800RF-ADMIN
10/13/2011 03:36:48.862 PM - W800RF Plugin Version: 0.3.1
10/13/2011 03:36:48.877 PM - Port is set to: 5
10/13/2011 03:36:48.877 PM - Debounce is set to: 120
10/13/2011 03:36:48.893 PM - W800RF found on COM5
10/13/2011 03:36:48.909 PM - Finished Loading: W800RF-ADMIN
10/13/2011 03:36:49.533 PM - Swapped HEX: 40 BF 4 FB
10/13/2011 03:36:49.533 PM - HouseCode=M UnitCode=13 FunctionCode=ON
10/13/2011 03:36:49.533 PM - GetObjectByAddress: M13
10/13/2011 03:36:49.626 PM - ---------------------------------------------------------------------
10/13/2011 03:36:49.642 PM - Set: Kitchen Motion to ON
10/13/2011 03:36:49.860 PM - Swapped HEX: 40 BF 4 FB
10/13/2011 03:36:49.860 PM - HouseCode=M UnitCode=13 FunctionCode=ON
10/13/2011 03:36:49.860 PM - ReadCommPort SPAM (Exiting Sub, this is normal)
10/13/2011 03:36:57.426 PM - Swapped HEX: 48 B7 C0 3F
10/13/2011 03:36:57.426 PM - HouseCode=K UnitCode=7 FunctionCode=ON
10/13/2011 03:36:57.426 PM - GetObjectByAddress: K7
10/13/2011 03:36:57.567 PM - ---------------------------------------------------------------------
10/13/2011 03:36:57.567 PM - Set: X10-K7 to ON
10/13/2011 03:36:57.785 PM - Swapped HEX: 48 B7 C0 3F
10/13/2011 03:36:57.785 PM - HouseCode=K UnitCode=7 FunctionCode=ON
10/13/2011 03:36:57.785 PM - ReadCommPort SPAM (Exiting Sub, this is normal)
10/13/2011 03:36:58.003 PM - Swapped HEX: 48 B7 C0 3F
10/13/2011 03:36:58.003 PM - HouseCode=K UnitCode=7 FunctionCode=ON
10/13/2011 03:36:58.003 PM - ReadCommPort SPAM (Exiting Sub, this is normal)
10/13/2011 03:36:58.253 PM - Swapped HEX: 68 97 C0 3F
10/13/2011 03:36:58.253 PM - HouseCode=K UnitCode=7 FunctionCode=OFF
10/13/2011 03:36:58.253 PM - GetObjectByAddress: K7
10/13/2011 03:36:58.425 PM - ---------------------------------------------------------------------
10/13/2011 03:36:58.425 PM - Set: X10-K7 to OFF
10/13/2011 03:36:58.627 PM - Swapped HEX: 68 97 C0 3F
10/13/2011 03:36:58.627 PM - HouseCode=K UnitCode=7 FunctionCode=OFF
10/13/2011 03:36:58.627 PM - ReadCommPort SPAM (Exiting Sub, this is normal)
10/13/2011 03:36:59.049 PM - Swapped HEX: 48 B7 C0 3F
10/13/2011 03:36:59.049 PM - HouseCode=K UnitCode=7 FunctionCode=ON
10/13/2011 03:36:59.049 PM - GetObjectByAddress: K7
10/13/2011 03:36:59.158 PM - ---------------------------------------------------------------------
10/13/2011 03:36:59.158 PM - Set: X10-K7 to ON
10/13/2011 03:36:59.392 PM - Swapped HEX: 48 B7 C0 3F
10/13/2011 03:36:59.392 PM - HouseCode=K UnitCode=7 FunctionCode=ON
10/13/2011 03:36:59.392 PM - ReadCommPort SPAM (Exiting Sub, this is normal)
10/13/2011 03:36:59.626 PM - Swapped HEX: 48 B7 C0 3F
10/13/2011 03:36:59.626 PM - HouseCode=K UnitCode=7 FunctionCode=ON
10/13/2011 03:36:59.626 PM - ReadCommPort SPAM (Exiting Sub, this is normal)
10/13/2011 03:37:00.265 PM - Swapped HEX: 68 97 C0 3F
10/13/2011 03:37:00.265 PM - HouseCode=K UnitCode=7 FunctionCode=OFF
10/13/2011 03:37:00.265 PM - GetObjectByAddress: K7

Vaughn
Site Admin
Posts: 1432
Joined: Thu May 13, 2010 2:17 pm

Re: W800RF signal garbage.

#15 Post by Vaughn » Thu Oct 13, 2011 12:43 pm

Just checked my Com port settings and they are at 9600,N,8,1 with no flow control. I am using a SerialGear 4-port Com to USB adapter.

Vaughn

Humanzee
Posts: 83
Joined: Mon Jun 14, 2010 1:09 pm

Re: W800RF signal garbage.

#16 Post by Humanzee » Thu Oct 13, 2011 5:11 pm

I thought that I read that the w800rf would only run at 4800 baud. which is how I have mine set, ill have a look at my insteon settings, grab the new plugin and have a look. The K7 I am transmitting is from and MR16a, I have the cover off so I can just hit the on button. I also have a one of those 10 button keypad white brick things, but I think the slider bar switch is bad because it frequently switches from one house code to another +10.

Humanzee
Posts: 83
Joined: Mon Jun 14, 2010 1:09 pm

Re: W800RF signal garbage.

#17 Post by Humanzee » Thu Oct 13, 2011 5:34 pm

Set my Com Port to 9600, no change. I haven't installed the Insteon plugin or any other plugin's since the last time I dropped and re-installed OSA. Only other thing that is running is the script processor.

Ran the WGL demo again to see if the baud changed anything there, watching the wife walk around the house, all codes seem as expected.

Code: Select all

6:29:20 PM - 00 FF 24 DB     X10 Cmd: O 9 On
6:29:21 PM - 02 FD 04 FB     X10 Cmd: O 5 On
6:29:22 PM - 16 E9 03 FC     X10 Cmd: K 7 Off
6:29:24 PM - 0E F1 04 FB     X10 Cmd: O 6 Off
6:29:27 PM - 0C F3 24 DB     X10 Cmd: O 10 Off
6:29:27 PM - 1E E1 04 FB     X10 Cmd: O 8 Off
6:29:29 PM - 0C F3 04 FB     X10 Cmd: O 2 Off
6:29:37 PM - 02 FD 04 FB     X10 Cmd: O 5 On
6:29:40 PM - 00 FF 04 FB     X10 Cmd: O 1 On
6:29:46 PM - 02 FD 03 FC     X10 Cmd: K 5 On
6:29:46 PM - 00 FF 04 FB     X10 Cmd: O 1 On
6:29:48 PM - 02 FD 04 FB     X10 Cmd: O 5 On
6:29:51 PM - 00 FF 24 DB     X10 Cmd: O 9 On
6:29:57 PM - 02 FD 04 FB     X10 Cmd: O 5 On
6:29:57 PM - 12 ED 04 FB     X10 Cmd: O 7 On
6:30:0 PM - 00 FF 24 DB     X10 Cmd: O 9 On
6:30:3 PM - 08 F7 24 DB     X10 Cmd: O 10 On
6:30:4 PM - 12 ED 05 FA     X10 Cmd: G 7 On
6:30:4 PM - 1A E5 04 FB     X10 Cmd: O 8 On
6:30:5 PM - 02 FD 03 FC     X10 Cmd: K 5 On
6:30:5 PM - 08 F7 04 FB     X10 Cmd: O 2 On
6:30:6 PM - 0A F5 04 FB     X10 Cmd: O 6 On
6:30:11 PM - 10 EF 04 FB     X10 Cmd: O 3 On
6:30:12 PM - 04 FB 23 DC     X10 Cmd: K 9 Off
6:30:13 PM - 04 FB 03 FC     X10 Cmd: K 1 Off
6:30:18 PM - 10 EF 04 FB     X10 Cmd: O 3 On
6:30:25 PM - 12 ED 03 FC     X10 Cmd: K 7 On

Here is my 0.3.1 log for K7. Are you thinking this is not a debounce issue?

Code: Select all

10/13/2011 06:21:02.931 PM - Found my Object Name: W800RF-Pleepleus
10/13/2011 06:21:02.947 PM - W800RF Plugin Version: 0.3.1
10/13/2011 06:21:02.951 PM - Port is set to: 2
10/13/2011 06:21:02.956 PM - Debounce is set to: 120
10/13/2011 06:21:02.967 PM - W800RF found on COM2
10/13/2011 06:21:02.971 PM - Finished Loading: W800RF-Pleepleus
10/13/2011 06:21:03.375 PM - Swapped HEX:  0 0 60 0
10/13/2011 06:21:03.510 PM - Swapped HEX:  0 0 9F 0
10/13/2011 06:21:03.634 PM - Swapped HEX:  0 0 17 DB
10/13/2011 06:21:03.758 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:21:03.768 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:21:03.773 PM - GetObjectByAddress: K1
10/13/2011 06:21:03.871 PM - ---------------------------------------------------------------------
10/13/2011 06:21:03.875 PM - Set: X10-K1 to ON
10/13/2011 06:21:04.010 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:21:04.015 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:21:04.025 PM - GetObjectByAddress: C1
10/13/2011 06:21:04.086 PM - ---------------------------------------------------------------------
10/13/2011 06:21:04.090 PM - Set: X10-C1 to ON
10/13/2011 06:21:04.214 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:21:04.218 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:21:04.222 PM - GetObjectByAddress: K1
10/13/2011 06:21:04.272 PM - ---------------------------------------------------------------------
10/13/2011 06:21:04.277 PM - Set: X10-K1 to ON
10/13/2011 06:21:04.401 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:21:04.406 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:21:04.410 PM - GetObjectByAddress: C1
10/13/2011 06:21:04.464 PM - ---------------------------------------------------------------------
10/13/2011 06:21:04.468 PM - Set: X10-C1 to ON
10/13/2011 06:21:04.604 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:21:04.609 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:21:04.613 PM - GetObjectByAddress: K1
10/13/2011 06:21:04.674 PM - ---------------------------------------------------------------------
10/13/2011 06:21:04.680 PM - Set: X10-K1 to ON
10/13/2011 06:21:04.805 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:21:04.810 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:21:04.816 PM - GetObjectByAddress: C1
10/13/2011 06:21:04.882 PM - ---------------------------------------------------------------------
10/13/2011 06:21:04.887 PM - Set: X10-C1 to ON
10/13/2011 06:21:05.013 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:21:05.018 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:21:05.022 PM - GetObjectByAddress: K1
10/13/2011 06:21:05.083 PM - ---------------------------------------------------------------------
10/13/2011 06:21:05.087 PM - Set: X10-K1 to ON
10/13/2011 06:21:05.212 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:21:05.217 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:21:05.222 PM - GetObjectByAddress: C1
10/13/2011 06:21:05.274 PM - ---------------------------------------------------------------------
10/13/2011 06:21:05.278 PM - Set: X10-C1 to ON
10/13/2011 06:21:05.403 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:21:05.409 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:21:05.414 PM - GetObjectByAddress: K1
10/13/2011 06:21:05.466 PM - ---------------------------------------------------------------------
10/13/2011 06:21:05.471 PM - Set: X10-K1 to ON
10/13/2011 06:21:05.597 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:21:05.602 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:21:05.607 PM - GetObjectByAddress: C1
10/13/2011 06:21:05.665 PM - ---------------------------------------------------------------------
10/13/2011 06:21:05.669 PM - Set: X10-C1 to ON
10/13/2011 06:21:05.807 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:21:05.813 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:21:05.818 PM - GetObjectByAddress: K1
10/13/2011 06:21:05.868 PM - ---------------------------------------------------------------------
10/13/2011 06:21:05.875 PM - Set: X10-K1 to ON
10/13/2011 06:21:06.011 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:21:06.016 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:21:06.022 PM - GetObjectByAddress: C1
10/13/2011 06:21:06.121 PM - ---------------------------------------------------------------------
10/13/2011 06:21:06.125 PM - Set: X10-C1 to ON
10/13/2011 06:21:06.261 PM - Swapped HEX:  0 0 20 DF
10/13/2011 06:21:06.267 PM - HouseCode=O UnitCode=1 FunctionCode=ON
10/13/2011 06:21:06.272 PM - GetObjectByAddress: O1
10/13/2011 06:21:06.318 PM - ---------------------------------------------------------------------
10/13/2011 06:21:06.323 PM - Set: X10-O1 to ON
10/13/2011 06:21:06.449 PM - Swapped HEX:  0 0 40 BF
10/13/2011 06:21:06.455 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:21:06.460 PM - GetObjectByAddress: C1
10/13/2011 06:21:06.510 PM - ---------------------------------------------------------------------
10/13/2011 06:21:06.516 PM - Set: X10-C1 to ON
10/13/2011 06:21:06.654 PM - Swapped HEX:  0 0 20 DF
10/13/2011 06:21:06.660 PM - HouseCode=O UnitCode=1 FunctionCode=ON
10/13/2011 06:21:06.666 PM - GetObjectByAddress: O1
10/13/2011 06:21:06.744 PM - ---------------------------------------------------------------------
10/13/2011 06:21:06.748 PM - Set: X10-O1 to ON
10/13/2011 06:21:06.880 PM - Swapped HEX:  0 0 40 BF
10/13/2011 06:21:06.885 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:21:06.891 PM - GetObjectByAddress: C1
10/13/2011 06:21:06.951 PM - ---------------------------------------------------------------------
10/13/2011 06:21:06.957 PM - Set: X10-C1 to ON
10/13/2011 06:21:07.100 PM - *** Received Shut-Down.  ComPort Timer Stopped

Humanzee
Posts: 83
Joined: Mon Jun 14, 2010 1:09 pm

Re: W800RF signal garbage.

#18 Post by Humanzee » Thu Oct 13, 2011 5:41 pm

Sent K7 from an HR12A and it looks about the same.

Code: Select all

10/13/2011 06:39:23.708 PM - Found my Object Name: W800RF-Pleepleus
10/13/2011 06:39:23.723 PM - W800RF Plugin Version: 0.3.1
10/13/2011 06:39:23.728 PM - Port is set to: 2
10/13/2011 06:39:23.733 PM - Debounce is set to: 120
10/13/2011 06:39:23.745 PM - W800RF found on COM2
10/13/2011 06:39:23.749 PM - Finished Loading: W800RF-Pleepleus
10/13/2011 06:39:28.300 PM - Swapped HEX:  0 0 B6 0
10/13/2011 06:39:28.425 PM - Swapped HEX:  0 0 9 0
10/13/2011 06:39:28.561 PM - Swapped HEX:  0 0 F1 B
10/13/2011 06:39:28.698 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:39:28.708 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:39:28.712 PM - GetObjectByAddress: K1
10/13/2011 06:39:28.795 PM - ---------------------------------------------------------------------
10/13/2011 06:39:28.799 PM - Set: X10-K1 to ON
10/13/2011 06:39:28.935 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:39:28.945 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:39:28.950 PM - GetObjectByAddress: C1
10/13/2011 06:39:29.000 PM - ---------------------------------------------------------------------
10/13/2011 06:39:29.004 PM - Set: X10-C1 to ON
10/13/2011 06:39:29.129 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:39:29.134 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:39:29.139 PM - GetObjectByAddress: K1
10/13/2011 06:39:29.186 PM - ---------------------------------------------------------------------
10/13/2011 06:39:29.191 PM - Set: X10-K1 to ON
10/13/2011 06:39:29.316 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:39:29.322 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:39:29.327 PM - GetObjectByAddress: C1
10/13/2011 06:39:29.377 PM - ---------------------------------------------------------------------
10/13/2011 06:39:29.381 PM - Set: X10-C1 to ON
10/13/2011 06:39:29.505 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:39:29.511 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:39:29.516 PM - GetObjectByAddress: K1
10/13/2011 06:39:29.564 PM - ---------------------------------------------------------------------
10/13/2011 06:39:29.569 PM - Set: X10-K1 to ON
10/13/2011 06:39:29.695 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:39:29.701 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:39:29.706 PM - GetObjectByAddress: C1
10/13/2011 06:39:29.781 PM - ---------------------------------------------------------------------
10/13/2011 06:39:29.786 PM - Set: X10-C1 to ON
10/13/2011 06:39:29.912 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:39:29.917 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:39:29.922 PM - GetObjectByAddress: K1
10/13/2011 06:39:29.972 PM - ---------------------------------------------------------------------
10/13/2011 06:39:29.978 PM - Set: X10-K1 to ON
10/13/2011 06:39:30.104 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:39:30.110 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:39:30.116 PM - GetObjectByAddress: C1
10/13/2011 06:39:30.182 PM - ---------------------------------------------------------------------
10/13/2011 06:39:30.188 PM - Set: X10-C1 to ON
10/13/2011 06:39:30.326 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:39:30.332 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:39:30.337 PM - GetObjectByAddress: K1
10/13/2011 06:39:30.447 PM - ---------------------------------------------------------------------
10/13/2011 06:39:30.453 PM - Set: X10-K1 to ON
10/13/2011 06:39:30.590 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:39:30.597 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:39:30.604 PM - GetObjectByAddress: C1
10/13/2011 06:39:30.663 PM - ---------------------------------------------------------------------
10/13/2011 06:39:30.668 PM - Set: X10-C1 to ON
10/13/2011 06:39:30.794 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:39:30.801 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:39:30.807 PM - GetObjectByAddress: K1
10/13/2011 06:39:30.869 PM - ---------------------------------------------------------------------
10/13/2011 06:39:30.875 PM - Set: X10-K1 to ON
10/13/2011 06:39:31.012 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:39:31.018 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:39:31.025 PM - GetObjectByAddress: C1
10/13/2011 06:39:31.088 PM - ---------------------------------------------------------------------
10/13/2011 06:39:31.095 PM - Set: X10-C1 to ON
10/13/2011 06:39:31.233 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:39:31.240 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:39:31.246 PM - GetObjectByAddress: K1
10/13/2011 06:39:31.298 PM - ---------------------------------------------------------------------
10/13/2011 06:39:31.305 PM - Set: X10-K1 to ON
10/13/2011 06:39:31.431 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:39:31.438 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:39:31.446 PM - GetObjectByAddress: C1
10/13/2011 06:39:31.502 PM - ---------------------------------------------------------------------
10/13/2011 06:39:31.509 PM - Set: X10-C1 to ON
10/13/2011 06:39:31.636 PM - Swapped HEX:  0 0 C4 3B
10/13/2011 06:39:31.643 PM - HouseCode=K UnitCode=9 FunctionCode=ON
10/13/2011 06:39:31.650 PM - GetObjectByAddress: K9
10/13/2011 06:39:31.707 PM - ---------------------------------------------------------------------
10/13/2011 06:39:31.712 PM - Set: X10-K9 to ON
10/13/2011 06:39:31.839 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:39:31.846 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:39:31.853 PM - GetObjectByAddress: C1
10/13/2011 06:39:31.910 PM - ---------------------------------------------------------------------
10/13/2011 06:39:31.917 PM - Set: X10-C1 to ON
10/13/2011 06:39:32.043 PM - Swapped HEX:  0 0 C0 3F
10/13/2011 06:39:32.050 PM - HouseCode=K UnitCode=1 FunctionCode=ON
10/13/2011 06:39:32.057 PM - GetObjectByAddress: K1
10/13/2011 06:39:32.121 PM - ---------------------------------------------------------------------
10/13/2011 06:39:32.127 PM - Set: X10-K1 to ON
10/13/2011 06:39:32.254 PM - Swapped HEX:  0 0 48 B7
10/13/2011 06:39:32.261 PM - HouseCode=C UnitCode=1 FunctionCode=ON
10/13/2011 06:39:32.268 PM - GetObjectByAddress: C1
10/13/2011 06:39:32.342 PM - ---------------------------------------------------------------------
10/13/2011 06:39:32.349 PM - Set: X10-C1 to ON
10/13/2011 06:39:32.476 PM - Swapped HEX:  0 0 60 9F
10/13/2011 06:39:32.484 PM - HouseCode=A UnitCode=1 FunctionCode=ON
10/13/2011 06:39:32.492 PM - GetObjectByAddress: A1
10/13/2011 06:39:32.546 PM - ---------------------------------------------------------------------
10/13/2011 06:39:32.554 PM - Set: X10-A1 to ON
10/13/2011 06:39:32.681 PM - Swapped HEX:  0 0 1D BB
10/13/2011 06:39:33.989 PM - *** Received Shut-Down.  ComPort Timer Stopped

Humanzee
Posts: 83
Joined: Mon Jun 14, 2010 1:09 pm

Re: W800RF signal garbage.

#19 Post by Humanzee » Thu Oct 13, 2011 5:48 pm

Switched to W800 Factory antenna, no change, still getting K1, C1

Vaughn
Site Admin
Posts: 1432
Joined: Thu May 13, 2010 2:17 pm

Re: W800RF signal garbage.

#20 Post by Vaughn » Thu Oct 13, 2011 7:37 pm

Well, the only difference then is the devices you are using, I do not know what they are (could look them up obviously) but your first 2 Hex addresses are registering as 0. The W800RF code is by device type, so it may just be skipping over those addresses because they are not in the case statement of know device types....


Please test with a MS13,14,16A, palm pad, MS10A... . Else I have to order those devices and check their binary/hex codes and handle them.


I will order them if the other devices work properly, but don't want to if my diagnoses is not right.

Vaughn

Post Reply