Has anyone got the CM11a to work on Win 8.1 64 bit???

Post Reply
Message
Author
Datahead
Posts: 710
Joined: Fri Jan 27, 2012 6:50 am
Location: San Marcos, Ca.

Has anyone got the CM11a to work on Win 8.1 64 bit???

#1 Post by Datahead » Mon Dec 08, 2014 6:57 am

After reading here a little I see there is an issue with the cm11a and 64 bit systems... Has anyone fond a fix for this? I have tried registering all the OCX files and they load but still coming up with this error:

12/08/2014 06:45:23.813 AM - Error in InitializePlugin: Retrieving the COM class factory for component with CLSID {2F1818FA-BFAA-11D2-BAC4-006097C0E8C9} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).

Thanks
Ron

User avatar
kherron
Posts: 639
Joined: Mon Dec 05, 2011 10:44 am
Location: Jacksonville, Fl.
Contact:

Re: Has anyone got the CM11a to work on Win 8.1 64 bit???

#2 Post by kherron » Mon Dec 08, 2014 7:41 am

After reading here a little I see there is an issue with the cm11a and 64 bit systems... Has anyone fond a fix for this?
Not that I know of.

I know someone tried to follow that same instructions for the cm15a, but it did not work.
I think it has to do with it being an ocx instead of a dll.

The issue is that OSA runs in 64bit, but the ocx is only available to 32bit.
If you re-Install 8.1 as 32bit, it will work fine.(Don't know why anyone would want to downgrade)

But right now, I think it's the only solution.

Datahead
Posts: 710
Joined: Fri Jan 27, 2012 6:50 am
Location: San Marcos, Ca.

Re: Has anyone got the CM11a to work on Win 8.1 64 bit???

#3 Post by Datahead » Mon Dec 08, 2014 10:22 am

Bummer,
Oh well, looks like it stays on the other machine for now. Totally agree as to the downgrading from 64 to 32...
Thanks,

Post Reply