Known working Zwave device list

Post Reply
Message
Author
Automate
Posts: 1691
Joined: Sat Dec 11, 2010 1:44 pm
Location: US

Known working Zwave device list

#1 Post by Automate » Thu Dec 11, 2014 8:22 am

List of Zwave devices which have been tested and verified to work with OSA.

Make a post in this topic with the name of your working devices and I will add them to this first post.
Please refrain from asking if devices work or troubleshooting issues in this topic.

Controllers
Aeon Z-Stick S2 (add a USB extension cable and raise the Z-Stick higher for best reliability/range/speed)

Plugin Modules
HomePro | ZRP210 Appliance Module - Poor range
Everspring |AN157 Appliance Module - Good range (AN157-2: 3500W / AN157-3: 2990W)
Everspring | AD142 Plug-in Dimmer Module - Works great
GE | 45603 Plug-In Appliance Module
GE | 45604 Outdoor Appliance Module

Wall Switches
Jassco (GE) | 45609 Lighting Control On/Off Switch

Light Sockets
Everspring | AN145 Z Wave Bulb Holder - Excellent range

Remote Light Module
Fibaro - FGD211 Universal Dimmer 500W - works perfectly

Sensors
Aeon Labs | Multi Sensor 1.18 - Works great, have to modify a property with ZVirtual Scenes
Aeon Labs | Micro switch
Everspring | ST814 Temperature and Humidity Sensor - Needed a little setup work but works great
Everspring | HSM02 Mini Door/Window Detector - Works well

Thermostat
2GIG | CT100 requires manually adding methods and events



Partially Working
EUROtronic | (EUR_STELLAZ) Wall Radiator Thermostat Valve Control - Reporting temperature but not able to sent commands yet.
Horstmann | HRT4-ZW Thermostat Transmitter (Secure | SRT321 Thermostat Transmitter) - Reporting temperature but not tested any other functions.
Zipato | RGBW LED BULB - On/Off/Dim working. Not able to change color yet.

dj-eon
Posts: 89
Joined: Wed Jul 13, 2011 4:03 am
Location: UK

Re: Known working Zwave device list

#2 Post by dj-eon » Thu Dec 11, 2014 11:30 am

Note sure if it matters, but all these items are UK - (All work on OSA 0.4.3 via the Aeon stick listed).

Aeon Z-Stick S2 - Poor range
HomePro Appliance Module (Model ZRP210) - Poor range
Everspring Appliance Module (Model AN157-3) - Good range
Everspring Z Wave Bulb Holder (Model AN145) - Excellent range (this device alone is capable of carrying the z-wave signal across most of my home)

Hope this helps.

Maximo
Posts: 199
Joined: Thu Dec 15, 2011 8:53 am
Location: UK

Re: Known working Zwave device list

#3 Post by Maximo » Thu Dec 11, 2014 2:07 pm

Aeon Labs | Z-Stick S2 - Works great in my setup
Aeon Labs | Multi Sensor 1.18 - Works great
EUROtronic | (EUR_STELLAZ) Wall Radiator Thermostat Valve Control - Reporting temperature but not able to sent commands yet.
Everspring | AD142 Plug-in Dimmer Module - Works great
Everspring | AN157 Plug-in Appliance Module - Works great
Everspring | ST814 Temperature and Humidity Sensor - Needed a little setup work but works great
Horstmann | HRT4-ZW Thermostat Transmitter (Secure | SRT321 Thermostat Transmitter) - Reporting temperature but not tested any other functions.

All UK modules, I have plans for more devices to control my heating system so I'm hoping for more people with those devices.

volfan6415
Posts: 175
Joined: Sun Jun 08, 2014 9:24 am

Re: Known working Zwave device list

#4 Post by volfan6415 » Fri Dec 12, 2014 2:45 pm

2GIG CT100 - although the plugin didn't add all the methods or properties I was able to manually add them and now have full control - see thread

Aeon labs multi sensor - I had to modify a property via wave virtual scenes to enable the device to report

Aeon labs micro switch

bkpsu
Posts: 1
Joined: Sun Dec 14, 2014 1:15 pm

Re: Known working Zwave device list

#5 Post by bkpsu » Sun Dec 14, 2014 1:19 pm

Aeon ZStick S2 - No range issues, works great.

3 x Jassco (GE) Lighting Control On/Off Switch, 45609 - Have had to re-add by walking around with ZStick after power failures. Work reliably all other times.

Andre
Posts: 26
Joined: Tue Jul 08, 2014 6:29 am

Re: Known working Zwave device list

#6 Post by Andre » Wed Dec 17, 2014 3:10 am

Aeon Labs - Z-Stick S2 - Works great for me, now that I have added a USB extension and put it as high as possible. (Much faster and more reliable!)
Aeon Labs - Multi Sensor 1.18 - Works great after changing the reporting group with ZVirtual Scenes
Everspring - Z Wave Bulb Holder (Model AN145) - Excellent
Everspring - HSM02 Mini Door/Window Detector - Works well
Fibaro - FGD211 Universal Dimmer 500W - works perfectly

arunkumar
Posts: 1
Joined: Thu May 05, 2016 2:15 am
Contact:

Re: Known working Zwave device list

#7 Post by arunkumar » Thu May 05, 2016 2:35 am

I like home automation devices of z-wave. I am using Aeon Labs Heavy Duty Switch for heavy loads which i am able to control remotely and also saving my power bills.I would like to use some more z-wave products for my smart home in future. Thanks for the list

Post Reply